LED strip light lights , when used in interior decoration, do not need to be waterproof and protect against ultraviolet rays, and their installation is almost simple. For example, consider the photoelectric LED lamp. Each soft LED strip light has a double-sided adhesive on the back of the strip light. During installation , you can use double-sided glue and stick the thread directly in the desired place. In some places, the thread needs to be twisted along the way and attached to the work surface.
LED strip light or belt is a parallel series structure of circuits and consists of three LED series. All three lights can be cut and shortened or reconnected. The difference between the high voltage LED thread and the low voltage thread, i.e. 12 V DC, is only in the safety voltage, otherwise, both are the same in terms of energy saving.
High voltage strip light LED lights have an insulating cover in terms of safety, so the risk of electric shock is low in them. High voltage wire is prone to decay against light and thermal factors, which affects the useful life of these wires.
Read More: Can the 12V LED string work with a voltage lower than 12V?
"Harnessing Outdoor Brilliance: A Guide to Installing and Choosing LED Strip Lights for Exterior Spaces"
When LED strip lights are used in outdoor environments , they may wear out from rain and UV rays. If 3M glue is used to install this thread, after some time, the glue will loosen and the thread will fall. Therefore, the installation of external LED strips must be done inside special fixed grooves. When it is necessary to cut, shorten and connect these threads again, the working method is exactly like the internal threads, with the difference that waterproof glue should be used at the connection points.
It is time to choose the type of lighting. LED strip lighting is provided with different LED beads, the most common of which are SMD5050 and SMD2835 beads. We recommend 5050 beads for brightness. But if you just want the thread for decoration, use 2835 seeds. According to the standard, the traditional T5 lamp has a brightness of 1000 to 1200 lumens. The power of the 5050 Strip Light lamp, which has 60 lamps per meter of Strip Light, is between 12 and 14 watts, so the brightness will be 1000 lumens per meter of Strip Light. Instead, its power consumption is half that of a traditional T5 lamp. Unveiling the Distinctions: SMD 3528 vs. SMD 5050 LED Chips