The possibility of starting a fire due to LED filament lamps is low due to their low voltage. This cannot be said about poor qualities. Low-grade LED filaments are very dangerous near highly flammable materials because they can get very hot.
How about LED strip lights?
LED strip lights are made of thin, flexible circuit boards with LEDs arranged in arrays along their length. The length can vary from 1M to 5M spool.
The most common problems with strip lights are overheating and power cord failure. You have to understand that when many lights are connected together, more heat is definitely involved.
The same care applies to LED strip lights. While they are typically low voltage (120V for line voltage), hot spots can develop on the strip over time if not used and installed properly. LED strip lights require a power adapter, usually included in the package. presented. To avoid problems, you need to make sure that the power supply is not overloaded.
Line voltage strip lights may extend up to 50 meters. If you connect several, the power supply may be overloaded. You should also avoid installing your LED string near flammable materials. While the heat dissipation of the lights is relatively low, a simple spark due to improper wiring It may ignite the material and cause a fire
Do strip LED strip lights get hot enough to start a fire?
The LED strip light is designed with internal limited resistors. As long as the voltage remains within a certain range, there should be no reason to worry about starting a fire.
In addition, LED lights have a low voltage compared to incandescent bulbs, and LEDs use much less electricity.
An incandescent lamp can reach 216 degrees Celsius after only three minutes of operation. In contrast, an LED lamp heats up to 32 degrees Celsius only after the same period of time. It goes without saying that LED lights, like other lights, require proper installation. Since they are more complicated than incandescent lamps. To be safe, you must strictly follow the manufacturer’s specifications. LED lights require a driver to regulate the power. This is very important for the performance of the LED circuits and to prevent system failure. If there is a heating problem in your LED strip lights, it may be due to the driver or capacitor.
Fortunately, most standard LED lights already have a driver in the bulb, so you don’t need to install an external driver. Another concern is air circulation. Strip lights run hotter when installed in tight spaces. The more LEDs on the strip, the more heat is generated
Important points for LED installation to reduce the risk of fire
- There should be enough space for air flow and to dissipate excess heat. Avoid installing LED strip lights behind curtains or under carpets or rugs.Does LED string cause fire?
- Placing them near flammable items such as alcohol, aerosol cans, cardboard and paper is also dangerous.
- Heaters near your LED filament are a safety hazard, so care must be taken when placing them.
- Water is not recommended near the strip lights, so you should avoid placing them in the bathroom or other water sources.
- When installing the LED string, make sure that the cables connected to the electrical outlet are not exposed or damaged. The cables are insulated to protect you from the currents passing through them. If they break, they can cause a power surge that causes the strip lights to overheat
- Finally, you should always check that the power supply is not overloaded.